How to Find IP Address Details for Your Device and Network

How to Find IP Address Details for Your Device and Network

How to Find IP Address Details for Your Device and Network

A printer on your home network needs your computer’s local address; a remote service may instead ask for the public address it sees. Those are different jobs. To locate the right IP address, first decide which device, connection and address family you need, then look in its network settings or check from outside.

Where an IP address appears also depends on the connection: Wi-Fi, Ethernet and a VPN can each have their own interface, the software representation of a network connection. A device may show both IPv4 and IPv6 addresses for the same interface.

Where to find IP address information locally

To learn how to find an IP address in Windows, open Command Prompt, enter ipconfig, and find the section for the active Wi-Fi or Ethernet adapter. Read the lines labeled IPv4 Address, IPv6 Address and Default Gateway as needed. The command ipconfig /all adds more detail. Windows also displays connection properties under Settings > Network & internet; see Microsoft’s network settings guide.

On Mac, open System Settings > Wi-Fi, select Details beside the connected network and look for IP address and Router. TCP/IP shows further IPv4 and IPv6 settings. For a wired connection, select the connected Ethernet service in Network settings. Apple describes these Wi-Fi details.

On iPhone or iPad, open Settings > Wi-Fi and tap the information button beside the connected network. On Android, open Settings > Network & internet > Internet or Wi-Fi, then tap the connected network and its details. Labels vary by device and software version. Look for IP address and, where shown, gateway or router; expand advanced details if needed.

For Linux, where to find an IP address depends on the interface. Run ip address in a terminal and inspect the active interface. ip route shows IPv4 routes, including a default route and its gateway. ip -6 route shows IPv6 routes. Interface names vary: check the connection name and state rather than choosing the first block.

Read the numbers in context

IPv4 addresses use four decimal numbers separated by dots, such as 192.168.1.42. IPv6 addresses use hexadecimal groups separated by colons, such as 2001:db8::42. The latter is a documentation example. IPv6 can include several addresses with different scopes and lifetimes; a link-local address beginning fe80: works on the local link and is not the public address observed by an internet service.

The client address identifies the interface on that network. The default gateway identifies the router used to reach other networks. For example, a laptop might have 192.168.1.42 while its gateway is 192.168.1.1. Enter the client address when connecting to a service on the laptop from the same LAN; use the gateway address when accessing the router’s management page. The actual numbers on your network may differ.

How do I find an IP address for a printer? Check its network status screen or printed network report, then compare it with the router’s connected-device list. The list may show older entries, so confirm that the printer is connected and the address is current. Knowing how to find an IP address on the device itself helps distinguish it from the gateway.

Find the address a website sees

Open a trusted external IP-checking service in the browser on the device and connection you want to test. The service reports the source address of that request; note whether the result is IPv4 or IPv6. Some services display both, while others use only the family through which you connected. A second service that explicitly tests each family can help when you need to compare them.

How do I find the IP address seen from outside? The external check is the direct way to see the address that particular website observed. It may not match the device’s local IPv4 address. With network address translation (NAT), a router or provider can translate traffic from private addresses to a shared public IPv4 address. The router’s WAN address can differ from the public result if another router or the provider also performs NAT.

A VPN or proxy may cause the website to see an exit server’s address instead of your usual connection’s address. Some privacy services affect only certain apps or requests. To compare, note the result with the service connected and, if appropriate, disconnected; use the same checker and address family. Do not disable a required work VPN without following your organization’s rules.

Choose the active connection

If Wi-Fi and Ethernet are both connected, each can have its own addresses; a VPN may add another interface. Look at the interface carrying the traffic you are investigating. On Windows, route print displays routes; on Linux, ip route get 1.1.1.1 shows the route and source selected for that IPv4 destination. Routes can differ for other destinations and for IPv6.

If you need to find an IP address for local troubleshooting, start with the connected adapter’s settings. To determine where to locate the public IP, use an external check over the intended connection. For remote access, also confirm whether the service is listening, the firewall permits it and any necessary forwarding is configured; knowing an address alone does not establish reachability.

Keep this checklist: choose local device or external view; identify the active interface and IPv4 or IPv6; record the client address separately from the gateway; then account for NAT, VPNs and other active connections before using the result.